Firestick Remote Won’t Pair After Factory Reset

Firestick Remote Won’t Pair After Factory Reset

Once you restart the Firestick TV to fix an issue, another possible issue that may arise is Fire Stick remote won’t pair. The Fire Stick remote allows you to navigate and control the Fire TV, however, if there is a pairing issue then it just won’t work and hamper your experience. 

However, this does not mean that you are completely stuck with it forever. The problem can be resolved quickly by following a few troubleshooting solutions. But first of all, you need to figure out the problem and then pair the Fire Stick remote.

fire tv support

Here we are going to discuss some of the steps that you can try when your Fire Stick remote won’t pair.

Restart the Fire TV Stick

 So, you just reset the Fire TV stick and now as mentioned in the troubleshooting step you should restart the Fire Tv again. Restart is a very easy step but it can do wonders in resolving the problem when Fire Stick remote won’t pair. 

All you need to do is unplug the Fire TV and then restart it again. Then, re-plug the Fire TV and try to pair the Fire TV stick remote again.

Change the Battery of the Remote

If your Fire TV stick remote is not pairing then there are high chances that the batteries of the remote need to be replaced or simply, they are not aligned properly.  

Take out the batteries of the remote. And then wait for a minute. Then put the same batteries in the Fire TV remote and try pairing it with the device. If this does not work then you need to replace the batteries with the new ones. Also, remember that before placing the batteries clean the compartments.

Use the Home Button to Pair the Fire Stick Remote

You can use the home button to fix the problem when Fire Stick remote won’t pair. Get closer to the remote and then press the home button on the remote. 

Keep pressing the button for at least 20-30 seconds. Then, a message will appear on the screen for confirmation. This means that the Fire Stick remote is successfully paired with the Fire TV.

 

Fire Stick Remote Reset

If the above-mentioned troubleshooting solutions do not work then you may have to reset the Fire Stick remote.

  • Switch off the Fire TV Stick.
  • Now, press the menu button, back button, and navigation at the same time for 20 seconds.
  • Release the button and then turn on the Fire TV Stick remote.
  • Then, press and hold the home button for 20 seconds to pair the remote.

If the steps mentioned above do not work then you will have to change the remote. However, you can also get in touch with Fire TV Stick experts for technical support. The team of experts helps and guides you through the steps when Fire Stick remote won’t pair with the streaming device. Additionally, they have the required knowledge and skills to get to the root cause and fix the problem accordingly.

fire tv support

Many times, when you are done with resetting the Fire TV, another problem that arises is that firestick remote won’t pair. This simply means that you can hardly do anything on your Fire TV stick, and the pain is real. The firestick remote allows you to stream and navigate different things on your Fire TV, however, it can cause a lot of problems when the Firestick Remote Won’t Pair After Factory Reset

Will you be able to use the fire TV stick again? Can you fix the problem with the firestick remote? Of course, yes! All you need to do is resolve the issue in the remote and pair it in the right manner to use it efficiently

Here are some of the tips that can help you fix the problem when your Firestick Remote Won’t Pair After Factory Reset with your fire TV.

  1. Restart the Fire TV Stick
    The first step that you need to follow is restarting the fire TV stick. Do not underestimate this method, as it can resolve a lot of issues. 

 As soon as you see remote control association on the screen but the firestick remote won’t pair after factory reset, then you shall remove the plug from the socket. After few minutes plug in the power source on your fire TV stick and wait for it to restart again. Now, wait for it to connect again and try pairing the firestick remote using the home button.

  1. Take off the Battery from the Remote

 You might think the other way but many times the batteries of the remote are not aligned properly. In such a case, the firestick remote won’t pair. So, take off the batteries and keep them aside for at least 30 seconds. After that place the batteries in the right way in the remote. Now pair it with the Fire TV stick.

  1. Replace the Old Batteries with New Ones

One of the most common reasons why firestick remote won’t pair after factory reset is because the batteries have been already drained. To check this, you will have to insert new batteries into the remote and then try pairing it. If it works then the drained batteries must be the reason behind the impaired remote.
have to remove the batteries, and properly clean the metal connectors using a clean cloth. 
As soon as, you are done with the cleaning, re-insert the batteries and switch on the Fire TV stick by restarting the Fire TV stick. Now try to pair it with the firestick remote.

fire tv support
  1. Clean the Compartments of the Battery

Often dirt and dust particles tend to accumulate in the battery compartments and it could be the reason why the firestick remote won’t pair after factory reset. To resolve this issue – Fire Stick Remote Won’t Pair

  1. Properly Pair it Using the Home Button
    Get closer to your Fire Tv set and now hold the start button of the remote for at least 30 seconds or wait until you get a confirmation text while trying to pair the remote. If the devices have been properly paired, you will receive a confirmation message at the right corner of the screen on the bottom.
    Do not lose your patience as you may have to repeat the process a couple of times while pairing the remote. If your firestick won’t pair you shall try pressing the home button for a few minutes, and then pair again. 

If you are unable to pair the firestick remote

  1. Pairing Using Other Buttons

While using the home button is the correct way to pair your firestick remote. Many times, you can pair the firestick remote by using other buttons like a play button, pause button, middle round button. Try pairing by pressing these buttons for at least 30 seconds and it might work for you. 

  1. Look for the Locked Buttons

 It might sound very obvious or too simple to try but many times the blocked buttons on the remote are stuck and that is why the firestick remote won’t pair after factory reset. So, try to check if the button is not locked and then pair it again.

  1. Remove Other Fire TV in the Close Proximity
    While pairing the remote make sure that there is no other fire TV located in the proximity. This is because any fire TV in the vicinity may affect the pairing process, and could be the reason why firestick remote won’t pair. Switch it off, restart the fire TV stick, and now pair it using the remote by holding the home button.

If you are still unable to pair the firestick remote

  1. Resetting the Firestick Remote
    First of all, remove the plug of the Fire TV stick. The firestick should be switched off. And then you shall hold the menu button, back button, and the navigation button at the same time on the Fire TV stick for at least 20 seconds. Now, release all of the buttons simultaneously while turning on the Fire TV stick. Now you can pair the firestick remote by holding the home button for half a minute.

However, if it does not work for you might have to get in touch with a firestick TV expert. They will help you in pairing the remote correctly.

Buy Another Remote
If you have tried all of the solutions mentioned in this blog and still your firestick remote won’t pair after factory reset. Then you might have to purchase a new remote. As sad as it might sound but you are now left with no option. 
Try purchasing a remote of the same generation as it will pair with your fire TV properly.

You can try borrowing someone’s firestick remote to check if it is compatible with your fire TV and then purchase the same. Either purchase a new one or try the steps again to repair it.

 If your firestick remote won’t pair after factory reset then there could be many reasons behind it. We have covered some of the most common problems that might come in between pairing the firestick remote properly. The solutions mentioned in this blog are likely to solve your pairing issues. However, if you still experience pairing problems in your firestick remote for detailed assistance.

fire tv support

The Amazon Fire TV is one of the most-streamed devices possibly for all the good reasons. However, sometimes pairing fire TV remote can be quite a task. We will provide you the necessary steps that can help you in pairing the fire TV remote and enjoy streaming your favorite things on Amazon fire stick remote won’t pair after factory reset.

The Fire TV comes with a remote and the latest update on the Amazon Fire TV has a modified version of the remote. The remote has some additional features like power control and mute buttons that make the functioning of the remote super smooth and easy. However, many times the users find difficulty in pairing fire TV remote and experience a number of issues. 

In this blog, we will discuss the steps that can help you in pairing fire TV remote properly so that you can utilize all the features of your Amazon Fire TV.

  • Check the Compatibility of the Remote – fire stick remote won’t pair after factory reset

 Before even starting pair the fire tv remote, it is important to make sure that the remote you are going to use is compatible with the Amazon Fire TV. Also, check if the batteries in the remote are charged and inserted properly. Besides, you shall also check if the remote is in the proper range of the Amazon Fire TV. While checking the batteries in the fire tv remote is a basic step, many people forget to check the compatibility of the remote. If the fire tv remote is not compatible with the Fire TV, then you should not waste your time in pairing fire TV remote, as it just won’t work.

  •  Restart the Fire TV

You can try restarting the fire TV. In order to restart you can try the following two methods. You can first try to unplug the device and then again plugin. Doing this can resolve some other issues as well. The other method is to use the fire TV remote for restarting. fire stick remote not pair after factory reset To do this you will have to hold the play or pause button at the same time for 10 seconds or more. Now, restart the device by selection from the menu option. 

One the device restarts, you can try repairing the device by pressing and holding the play/pause button. 

If you are unable to figure out anything or are finding difficulty in pairing fire TV remote then call the fire TV professionals

  • Remove the Batteries from the Fire TV Remote – fire stick remote won’t pair after factory reset

 While pairing the remote make sure to check the batteries. As foolish as it might sound but many times the problem is with the batteries and nothing else. Try replacing the batteries with the new ones, as some fire TV remote will only function with brand new batteries.

If you do not want to add new batteries, then try to take out the batteries and keep them out for 15 to 20 seconds. Then, place the batteries properly in the compartments. 

Many times, you will find that the battery compartment is filled with dust and dirt. It might be the reason why the batteries of the remote are not functioning properly. To solve this problem, you can clean the compartments and the metal connectors of the battery with a clean cloth or even tissue paper – fire stick remote won’t pair

  • Check of the Device is Paired

 Before pairing fire TV remote, you must understand why the remote is not pairing or fire stick remote won’t pair after factory reset. Make sure to check if the device is properly being paired with the remote. To check this, you will have to go to the settings option. 

 Choose the settings option, now choose the Bluetooth and controller option. Then check the device, it will be connected.

  • Check the Locked Buttons

 Many times, the buttons of the remote get locked and as a result, they get stuck in between. Try checking the buttons and start pairing the remote afterward.

  • Check for the Distance from the Fire TV

 While pairing fire TV remote, make sure the other Fire TV devices are away. Or you can turn off fire TV, as it might interfere with the pairing. Turn it off, restart and then try pairing it again – firestick remote won’t pair

  • Resetting Fire TV Remote

Turn off the fire TV. Now hold and keep pressing the menu button thrice, the back button, and the left of the navigation key, all at the same time. Now, switch on the Fire TV while releasing all of the buttons at once. Now, try pairing fire TV remote on the screen for 30 to 40 seconds. 

  • Try Using the Fire TV Remote Application – fire stick remote won’t pair after factory reset

If nothing seems to work then you can try using a fire TV remote app. The Amazon remote app can be installed on your android and iOS mobile phones, iPad, and tablets as well.  

You can find the application on the play store and Appstore and is absolutely free fire stick remote won’t pair

You can download the remote app and use it for the time your remote does not get paired. However, if you find using remote applications better than using the actual remote, you can always use the application instead of streaming. The app works in the same way as the actual remote along with some additional features. 

At the same time if you need help while pairing fire TV remote

  • Use Another Remote

As a last option, if nothing works or if you are simply tired of pairing your fire remote because it fails every time. Then purchasing a new remote is a great option for you. Other than that, you can try borrowing your friends’ fire TV remote to check if it pairs well, with your fire TV. And accordingly, buy a new remote for your fire TV.

If you are finding problems while pairing fire TV remote, then you do not have to worry. This blog covers all the steps that can help you pair the fires TV remote. These steps are easy and can resolve your problem in just a matter of a few minutes. However, if you want to seek help from a fire TV professional

fire tv support